Panasonic KX-TDA5450, Installation Manual

Page: 67 / 86

3.7.2 Channel Status
1.
Click 3.2 Channel Status .
2.
Confirm the status of each channel referring to the descriptions below.
Status Description
Not Used The settings for the channel are not configured, or Not Used
is selected in Channel Settings . Refer to "3.4.1 Channel &
SIP Telephony".
Initial WAN Connection Incomplete WAN connection is incomplete. Check the probable causes
below and make the necessary corrections:
•
Programming for the WAN interface is incorrect. Refer
to "3.3.1 WAN Interface".
•
The WAN port is not connected to the DCE (e.g., ADSL
Modem) correctly. Refer to "2.2.2 WAN Port Connection".
•
There is a malfunction on the WAN. For more information,
consult your network administrator.
SIP Registration Failed After WAN connection is complete, registration to the SIP
server failed. Check the probable causes below and make the
necessary corrections:
•
The settings for the channel are incorrect. Refer
to "3.4.1 Channel & SIP Telephony".
•
The WAN port is not connected to the DCE (e.g., ADSL
Modem) correctly. Refer to "2.2.2 WAN Port Connection".
•
There is a malfunction on the WAN. For more information,
consult your network administrator.
Idle WAN connection and registration to the SIP server are
complete. The channel is available and in standby status.
Busy WAN connection and registration to the SIP server are
complete. The channel is being used.
Document Version 2008-10 Installation Manual 67
3.7.2 Channel Status