manualshive.com logo in svg

Panasonic KX-TDA5450, Installation Manual

The Panasonic KX-TDA5450 Installation Manual is a comprehensive guide that assists users in setting up and configuring their Panasonic KX-TDA5450 phone system. This essential manual is available for free download at manualshive.com, ensuring easy access to necessary instructions and assisting users in utilizing their product effectively.

Share
Download
background image

Parameter & Description

Default

Value Range

Registrar Server

Specifies the domain name or IP address of a
registrar server (if provided). If an ITSP provides
both Proxy and Registrar Server information,
specify the Registrar Server information.

No default

*3

Available domain names or IP
addresses (max. 83
alphanumeric characters)

*2

Domain Name

Specifies the domain name (if provided besides
proxy and registrar server).

No default

*3

Max. 83 alphanumeric
characters

ITSP Name

Specifies the ITSP name (optional).

No default

Max. 8 alphanumeric
characters

DNS (SRV Record) Resolve Ability

Specifies whether to request that the DNS server
translates domain names into IP addresses using
the DNS SRV record. If disabled, "DNS A Record"
will be used in translation.

Disable

Enable, Disable

*1

Specify the domain name or the IP address of the outbound proxy server, if provided by the ITSP.

*2

If the port number of the server is not "5060", enter ":" and the specified port number after the domain name or IP address.
[Example]

•

If you do not need to specify the port number of the server (i.e., the port number is 5060):
Domain name format: example.com
IP address format: 192.168.1.1

•

If you need to specify the port number of the server:
Domain name format: example.com:

7777

IP address format: 192.168.1.1:

7777

The value range of the port number is 1024–65535.

*3

No need to change unless necessary.

*4

The actual length of time depends on the negotiation with the SIP server or the other device. Therefore, the Registration Timer
will not always function for the length of time set in advance.

2.

Assign parameters in 

Account Settings

 based on the information provided by the ITSP.

Parameter & Description

Default

Value Range

SIP Account

Specifies the SIP account (telephone number)
(compulsory).

No default

Max. 63 alphanumeric
characters

Authentication ID

Specifies the ID (compulsory).

No default

Max. 63 alphanumeric
characters

Authentication Password

Specifies the password (compulsory).

No default

Max. 32 alphanumeric
characters

36

Installation Manual

Document Version  2008-10  

3.4.1 Channel & SIP Telephony

Summary of Contents for KX-TDA5450























































































Reviews:

No comments

Related manuals for KX-TDA5450

ATCOM IPPBX IP08 Product Manual preview
IPPBX IP08
Brand: ATCOM Pages: 64
LV switch IPPBX3000 User Manual preview
IPPBX3000
Brand: LV switch Pages: 195
Panasonic KX-HTS32 Programming Item List preview
KX-HTS32
Brand: Panasonic Pages: 92

Brands by name

Popular brands

Load more brands