Panasonic KX-TDA3480 Programming Manual Download Page 14

Page: 14 / 68

2.2 Programming

Programming Guide

Parameter Descriptions

Port Number Settings

The parameters indicated with "

" must be changed while the VoIP Gateway Card is in the "STOP"

status (see "2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see
"2.5.1 Reboot").

The parameters indicated with "

" must be changed while the card is in the "STOP" status (see "2.3.1

Status Control"). The changes do not have to be followed by a reboot to become effective.

Parameter & Description

Default

Value Range

H.225 Port No.

Specifies the port number for the H.225 protocol (call
control) in an H.323 protocol suite.

Generally, there is no need to change the default value.

1720

1 to 65535

H.245 Port No.

Specifies the port number for the H.245 protocol
(negotiation of channel usage and capabilities) in an
H.323 protocol suite. Four consecutive ports, starting
with the specified port, will be used (by default, 1721 to
1724).

Generally, there is no need to change the default value.

1721

1 to 65532

RAS Port No.

Specifies the port number for the H.225 protocol (RAS)
in an H.323 protocol suite.

Generally, there is no need to change the default value.

1719

1 to 65535

RTP/RTCP Port No.

Specifies the port number for RTP/RTCP. Eight
consecutive ports, starting with the specified port, will
be used (by default, 5004 to 5011).

Generally, there is no need to change the default value.

5004

1 to 65528

Summary of Contents for KX-TDA3480





































































Search results

Summary of Contents for KX-TDA3480

Reviews:

Related manuals for KX-TDA3480

Brands by name

Popular brands

Panasonic KX-TDA3480, Programming Manual

Search results

Summary of Contents for KX-TDA3480

Reviews:

Related manuals for KX-TDA3480

Brands by name

Popular brands