Panasonic KX-TDA100D, Getting Started, Page: 27 / 32

Setting an Extension Port to Use a DSS Console
1. Under Configuration , click Slot .
2. Move the mouse pointer over the desired extension card
to display the menu of options.
3. Click Ous to set the card to out-of-service status.
4. Move the mouse pointer over the card again, then click
Port Property .
5. For DPT Type , set the Type to DSS and assign the
Location No. .
6. Click OK .
7. Under Extension , click DSS Console .
8. Select the desired pair extension number from Pair
Extension .
9. Assign features to flexible buttons as required.
10. Click OK .
11. Under Configuration , click Slot .
12. Move the mouse pointer over the card to display the
menu of options.
13. Click INS to set the card to in-service status.
14. Click Close .
Getting Started 27
4.3 Programming the PBX
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM