Panasonic KX-TDA100D, Getting Started, Page: 26 / 32

Assigning the Incoming Trunk Call Destination
For analogue trunk users (DIL Setting):
1. Under CO & Incoming Call , click DIL Table & Port
Settings .
2. Confirm that the DIL tab is selected.
3. Configure the settings as required.
4. Click OK .
For ISDN trunk users (DDI Setting):
1. Under CO & Incoming Call , click DDI / DID Table .
2. Configure the settings as required.
3. Click OK .
For ISDN trunk users (MSN Setting):
1. Under CO & Incoming Call , click DIL Table & Port
Settings .
2. Click the DDI / DID / TIE / MSN tab.
3. Set the Distribution Method of the desired ports to
MSN .
4. Click OK .
5. Click MSN Table .
6. Click the MSN tab.
7. Configure the settings as required.
8. Click OK .
26 Getting Started
4.3 Programming the PBX
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM