Signal Name
Function
POWTYPE
[1]
[0]
S Power Supply attached
H
H
M Power Supply attached
L
H
L Power Supply attached
H
L
nPRS_MEX
Press MEX: Information of MEX Card Attachment L: Attached, H: Not attached
nPRS_RMT
Press RMT: Information of RMT Card Attachment L: Attached, H: Not attached
nPRS_SDB
Press SD card: Information of SD Card Attachment L: Attached, H: Not attached
nRAS3L
Lower Byte Address Row Address Strobe: RAS signal for SDRAM
nRAS3U
Upper Byte Address Row Address Strobe: RAS signal for SDRAM
nRD
Read: USB I/F, SD card I/F, ASIC, SRAM, Read signal for flash memory
RD/nWR
Read/nWrite: Read/Write signal for SDRAM
nRESOUT
Reset Out: Reset from CPU (IC101) to each card
nRESET
Reset: Power-on reset signal
nRESETM
Manual Reset: Manual reset request signal for CPU
RINGER
Ringer Signal: Outputs square-wave of 16Hz/20Hz/25Hz as source signal of ringer
RING_SYNC
Trigger Signal of Ringer Signal generation timing to each internal line card
nRTS2
Request To Send to RS-232C connector
RTS_RMT
Request to Send: Flow signal for modem
RXD2
Receive Data from RS-232C connector
RXD_RMT
Serial Data Output Terminal: ASIC
SDCD
SD Card Detect Input
SDCLK
SD Card Clock Out
SDCMD
SD Command
SDDAT0-3
SD Card Data
SDWP
SD Card Write Protect Input
SHW_CLK
Intersystem Highway Clock Signal (4MHz) Bit clock of intersystem highway and
selectable among 256KHz/512KHz/1.024MHz/2.048MHz/4.096MHz.
SHW_FH
Intersystem Highway Synchronous Signal (8KHz) 8KHz frame synchronous signal
intersystem highway
TXD2
Transmit Data to RS-232C connector
TXD_RMT
Serial Data Input Terminal: Data receiving terminal from RMT to UART in the ASIC
nUB
Upper Byte Select: SRAM
USB_D+
USB Data +
USB_D-
USB Data -
36
Summary of Contents for KX-TDA100AL
