8
D1232
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
Notes • The KX-TD1232 is illustrated as a
main unit.
• If two or three expansion units are
installed, cut the cabinet covers on the
lower cabinets to allow the cords from
the upper cabinet to go down through
the cabinet covers. To protect the
cords, smooth the cut edges.
8. Tie all of the cords into a bundle. If
other cords are exposed in the upper
cabinets, tie them also.
9. Close the cabinet cover and secure
the outside screw.
10. Cover the cords with the cord holder
(included).
11. Fix the cords to the wall as shown so
that the front cover can be opened.
Programming References
Section 4, System Programming,
[109] Expansion Unit Type
— in this manual
Cord holder
Cut here
D1232
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
P
an
as
on
ic
2C
O
w
/P
FT
2C
O
ISDN
Port No.1
ISDN
Port No.2
TB
TA
RA
RB
To Terminal Board or Modular
Jacks from the Central Office
7. Insert the plug into a jack on the unit.
Connect an earth wire to the earth terminal
on the extension expansion unit.
Installing Expansion Unit (KX-TD280)
