4.6
CO Line Programming
CO Line Name Assignment
32
417
Description
Assigns company or customer names to each CO line so that the
operator or extension user can view the destination the caller is trying to
reach before answering.
Selection
• CO line number: KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 54,
(
=all CO lines)
• Name: 10 characters (max.)
Default
All CO lines – Not Stored
Programming
1.
Enter 417.
Display: CO Line Name
2.
Press NEXT.
Display: CO Line NO?
→
3.
Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4.
Enter a name.
For entering characters, see Section 4.1.3 “Entering Characters” in this
manual.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, CO 01 through CO 12 are for the Master System
and CO 13 through CO 24 are for the Slave, if available.
• CO 25 through CO 54 become available when the KX-TD290
expansion unit is installed in the KX-TD1232.
• To assign all CO lines to the same selection, press the
key in step 3.
In this case, the display shows the contents programmed for CO 01.
Feature References
Section 3, Features
CO Incoming Call Information Display — in this manual
Display, Call Information —Installation Manual, Vol. 3
