4.9
Resource Programming
SMDR Output Mode
815
37
Description
Assigns the SMDR Output Mode. There are two standards
available – Regular and Charge.
Selection
Regular / Charge
Default
Regular
Programming
1.
Enter 815.
Display: SMDR Output Mode
2.
Press NEXT.
Display example: SMDR:Regular
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
Conditions
• Select the Output Mode used by your SMDR.
• If you assign for Charge, you can select the display in Meter / in Charge
through Program [120] “Charge Display Selection.”
Feature References
Section 3, Features,
Station Message Detail Recording (SMDR) — in this manual
