manualshive.com logo in svg

Panasonic KX-TD816, Operating Instructions Manual, Page: 55 / 131

Share
Download
Panasonic KX-TD816 Operating Instructions Manual Download Page 55

1.5

During a Conversation

Operations

1-47

Basic Operations

Call Splitting

• This feature does not work during a doorphone call or paging.
• During a 5-party conference, you cannot use this feature.

• 1.5 During a Conversation, “Placing a Call on Hold (Call Hold)”
• 1.5 During a Conversation, “Placing a Call on Hold Exclusively (Exclusive Hold)”
• See the Installation Manual, Section 3, “Call Splitting”.

PT

Allows you to talk to two different parties alternately. If a call is received while you are
already on the line, you can place the current call on hold and have a conversation with the
other party.

Having a conversation while another call is on (exclusive) hold

SLT

Flash the hookswitch.

• The first held call is released.
• Flashing this switch alternates between the callers.

PT

Press CO or INTERCOM.

CO

or

INTERCOM

Press HOLD.

HOLD

Between one extension and one outside line

Press CO.

CO

Press HOLD.

HOLD

Between two outside lines

Press HOLD.

HOLD

Between two extensions

• Repeating these operations (steps 1 and 2)

alternates between the callers.

• Repeating these operations (steps 1 and 2)

alternates between the callers.

• Pressing the HOLD button alternates

between the callers.

!

!

☞

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for KX-TD816




































































































































Reviews:

No comments