manualshive.com logo in svg

Panasonic KX-TD612E, Features Manual, Page: 256 / 284

Share
Download
Panasonic KX-TD612E Features Manual Download Page 256

1.1

General Features

256

Features Guide

[Explanation]

•

Level 1: allows all calls.

•

Level  2:
denies the codes stored in the Denied Code Table for Level 2 except the codes stored in 
Excepted Code Tables for Levels 2 through 6.

•

Level  3:
denies the codes stored in the Denied Code Tables for Levels 2 and 3 except the codes 
stored in Excepted Code Tables for Levels 3 through 6.

•

Level  4:
denies the codes stored in the Denied Code Tables for Levels 2 through 4 except the 
codes stored in Excepted Code Tables for Levels 4 through 6.

•

Level  5:
denies the codes stored in the Denied Code Tables for Levels 2 through 5 except the 
codes stored in Excepted Code Tables for Levels 5 and 6.

•

Level  6:

•

denies the codes stored in the Denied Code Tables for Levels 2 through 6 except the 
codes stored in Excepted Code Table for Level 6.

•

denied intercom calls except operator calls.

•

Level 7: Allows intercom calls only.

•

Level 8: Allows operator calls only.

Level 

Denied Code Tables

Excepted Code Tables

Level 1

None

None

Level 2

Table for Level 2

Tables for Levels 2 through 6

Level 3

Tables for Levels 2 and 3

Tables for Levels 3 through 6

Level 4

Tables for Levels 2 to 4

Tables for Levels 4 through 6

Level 5

Tables for Levels 2 to 5

Tables for Levels 5 through 6

Level 6

Tables for Levels 2 to 6

Tables for Level 6

Level 7

None

None

Level 8

None

None

Summary of Contents for KX-TD612E





























































































































































































































































































Reviews:

No comments