manualshive.com logo in svg

Panasonic KX-TD612E, Features Manual

Share
Download
Panasonic KX-TD612E Features Manual Download Page 188

1.1

General Features

188

Features Guide

Mixed Station Capability

Description

This system supports a wide range of telephone sets, not only Digital Proprietary Telephone 
(DPT) in the Digital Super Hybrid System, but also single line rotary telephones (employing 
dial pulse signals) and single line push-button dialling telephones (touch tone). The super 
hybrid method used in this system allows any telephone to be connected to an extension 
modular jack without an adaptor.

Conditions

•

Extension jacks 5 to 8 can only accommodate DPTs.

•

If a telephone is replaced by another one, the stored data (such as feature button storage) is 
held for the new one.

•

It is possible to ignore the pulse dial by System Programming. In this case, a single line 
rotary telephone does not function.

Installation Manual References

•

2.4.3 Extension Connection

Programming Guide References

•

[121] Pulse Dial Reception Assignment

Features Guide References

None

User Manual References

Not Applicable

Summary of Contents for KX-TD612E





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands