Panasonic KX-TD500AL, User Manual

Page: 16 / 266

Operation
16 User Manual
2.1 Before Operating the Telephones
What kind of telephone can be used?
You can use a Single Line Telephone (SLT), such as a rotary pulse telephone or a Panasonic
Proprietary Telephone (PT) such as the KX-T7436. Operate the feature depending on the telephone
you are using. If you are using a Panasonic Proprietary Telephone with a special function button such
as or a display (Display PT) or both, you can follow the operation with the button or display
messages for easy programming.
If you use a large display telephone (e.g., KX-T7436), you can follow the displayed messages to
operate the features.
If your telephone does not have function buttons or a display or both, you may operate the unit by
entering a feature number instead. Follow the available operation with your telephone. If you use a
DSS Console, you can use the buttons on the DSS Console as the buttons on the connected
Proprietary Telephone.
For ISDN Extension Users
The KX-TD500 System also supports the connection of Terminal Equipment with separate power
supplies. For example, ISDN Telephones, G4 Facsimiles or Personal Computers which are
connected to an ISDN S0 bus on a BRI (Basic Rate Interface) card (KX-TD50288CE). A maximum
of eight Terminal Equipment can be connected to each ISDN S0 bus with Point-to-Multipoint
configuration. However, only up to two Terminal Equipment can be used simultaneously. Each
Terminal Equipment connected to the S0 bus can be addressed individually with Multiple Subscriber
Numbers (MSN). The MSN consists of the ISDN extension number and an additional digit, 0 through
9.
If MSN is not assigned, all equipment on the same S0 bus are called simultaneously.
• If you use a Panasonic Proprietary
Telephone which does not have
function buttons, you may change one
of the unused flexible buttons to a
function button. Please refer to
"4.1.2
Customising the Buttons."
REDIAL