Panasonic KX-TD500, Programming Manual

Page: 321 / 392

Maintenance
Programming Guide 321
Parameter Print out Caller ID Information
Default Number
Value Range 1.
Number
2.
Name
3.
Name
4.
Disable
Description/Function SMDR can print out Caller ID information. This setting specifies
whether priority is given to Caller ID Name or to Caller ID
Number. However, SMDR can print out both when "Type-D" is
specified as Output Type. SMDR can print out both Caller ID and
DDI / DID information simultaneously when "Type-E" is specified
as Output Type.
Reference • 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
• 1.5 Attended Features (F/G)
– Caller ID Service
Parameter Print out DDI / DID Information
Default Disable
Value Range
1.
Number
2.
Name
3.
Name
4.
Disable
Description/Function Activates or deactivates printing out the DDI / DID subscriber
number received from the Central Office.
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
Parameter Print out Incoming Call Start "RC" and Incoming Call Answer
"AN" information
Default Disable
Value Range 1.
Enable
2.
Disable
Description/Function Enables or disables the SMDR printout for RC (when an incoming
call occurs) and AN (when an incoming call is answered).
Reference • 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)