Panasonic KX-TD1232AL User Manual Addendum Download Page 45

Page: 45 / 154

4.2

DPT Features

CO Incoming Call Information Display

Provides you with incoming outside call information on an ISDN line provided
with the CLIP feature*. You can also record the information.

Operation (— for KX-T7235)

When you receive a CO incoming call, the display shows one of the
following.

•

The caller’s telephone number and name

•

The CO line number and CO line name

•

The called party’s DDI number and name

1. Lift the handset or press the SP-PHONE button.

• The display changes as shown to the left.

• If you want the normal display, press the SHIFT button. The

button line of the display shows:

2. Press the INFO (S1) button if you want to see the caller’s

information.

• The display changes as shown to the left.

3. Press the LOG (S2) button if you want to record the information.

The ISDN line with CLIP feature provides you with the caller’s information, such as his/her name and telephone number, on the CO
line assigned to receive ISDN service calls. Refer to the Added and Changed features for the Installation Manual.

F10

0111111111

JOHN WHITE

Extension STA Speed

Features SYS Speed

Call Log

F10

LOG

INFO

CO 09 00: 01'30

Extension STA Speed

Features SYS Speed

Call Log

F10

LOG

INFO

0111111111

JOHN WHITE

Extension STA Speed

Features SYS Speed

Call Log

F10

0111111111

JOHN WHITE

Extension STA Speed

Features SYS Speed

Call Log

CONT EFA ACCNT

DPT (72**)

✔

Summary of Contents for KX-TD1232AL



























































































































































Search results

Summary of Contents for KX-TD1232AL

Reviews:

Brands by name

Popular brands

Panasonic KX-TD1232AL, User Manual Addendum

Search results

Summary of Contents for KX-TD1232AL

Reviews:

Brands by name

Popular brands