6.2
SLT and ISDN Telephone Features
O
127
Operator Call
Allows you to call an operator within the system. There can be up to two extensions
assigned as Operator 1 and 2. If there is only one operator or if you do not specify the
operator, you should generate the General call. If you want to specify the operator, you
should generate the Specific call by pressing a pre-assigned operator call number.
General call
1. Lift the handset.
2. Dial the feature number (0).
Specific call
1. Lift the handset.
2. Dial the operator call number for each operator.
Conditions
• If you generate the General call for two operators, Operator 2 will receive your call if
Operator 1 is busy.
• If an operator is not assigned, this feature is not available; you will hear the reorder tone.
Programming References
• System Programming — Installation Manual & Installation Manual Addendum
[006] Operator / Manager Extension Assignment — Day / Night
[100] Flexible Numbering, Operator call, Operator 1 call, Operator 2 call
1
2
1
2
operator call number
