23
Chapter 1
Preparation
Time and Day Adjustment
Voice Time/Day Stamp: During playback, a synthesized voice will announce
the time and day when each message was recorded.
1
Press
(Program), then
(Intercom).
2
Press
.
•
"
" is displayed on the handset.
•
"
P
" is displayed on the base unit.
3
Press
.
•
"
" is displayed on the base unit.
•
"
Set time
" is announced.
The time/day will be heard if it was
adjusted beforehand.
4
Enter the current time (hour and minute)
by using a 4 digit number.
(Ex. To set 9:30, enter "0930".)
•
The entered number is displayed
on the base unit.
5
Press
to select "AM" or "PM".
Press
repeatedly to set the day.
•
The unit announces the day.
6
When finished, press
(Program).
•
The unit announces the time/day. The clock starts working.
0
I N T
To check the time/day
Press
(Program)
(Intercom)
.
•
The current time/day is heard. When finished, press
(Program).
0
I N T
If a power failure occurs, the adjusted time/day may be erased.
•
In step 4, you cannot enter numbers greater than 12.
(To set 13:00 hours, enter "0100" and select "PM" by pressing
).
•
The accuracy of the clock is approximately ±45 seconds a month at room
temperature.
Intercom Button
Program Button
I N T
KX-TCD970E(E)(014~030) 98.10.8 3:32 PM Page 23
