Transferring a Call using the Intercom
(continued)
3. (Handset 2) When the unit rings,
Z O
,
N
,
K
to
I
,
L
or
$
(-Any Key Answer), to answer.
4. (Handset 1) Transferring a call
Z P
• The transfer is completed
OR
To return to the External Call
Z N
.
Transferring a Call without the Intercom
This feature enables you to transfer an external call to another handset without waiting for
the paged handset to answer.
Eg. Handset 1 is transferring an external call to Handset 2.
1. (Handset 1)
During a call,
Z N
(Intercom icon turns on).
• The call is put on hold.
2. (Handset 1)
Z
desired handset no. eg.
B
• You will hear an internal ring back tone until the other handset is
answered.
3. (Handset 1)
Z P
.
4. (Handset 2) When the unit rings,
Z O
or
%
to answer.
• The transfer is completed.
• If the paged handset is not answered within 30 seconds, a ring tone
sounds at the paging handset. The paging handset can return to the call by pressing
O
. If the paging handset does not return to the call within 30 seconds, the external
call is automatically disconnected.
◆
Conference
During an external call, you can make an intercom call to another handset and then
combine the calls together to establish a conference call. (The handsets have to be
registered to the same base unit).
1. (Handset 1) During an external call,
Z N
then enter the desired handset
number eg.
B
.
• The external call is put on hold.
• If there is no answer at handset No.2,
Z N
to return to the call.
2. (Handset 2) When the unit rings,
Z O
,
N
,
K
to
I
,
L
or
$
(-Any Key Answer) to answer.
3. (Handset 1)
Z C
to establish a conference call.
4. (Handset 1 or 2)
Z P
to hang up on conference call.
33
30678_KX-TCD705G_a_English 8/5/01 6:58 am Page 33
