Panasonic KX-TCD705E Operating Instructions Manual Download Page 32

Page: 32 / 56

Paging/Intercom

◆

Paging All Handsets from the Base Unit

Z Ï

(On the Base Unit).

• All handsets will ring for one minute.

2. To stop paging,

Z Ï

again or

Z O

on one of the handsets.

◆

Intercom between Handsets

A 2-way intercom is available between handsets.
Eg. Handset 1 is paging Handset 2

1. (Handset 1)

Z N

(Int icon blinks until connection is established).

2. (Handset 1)

Z B

3. (Handset 2)

When the unit rings,

Z O

(Any

Key Answer), to answer.
• If Auto Talk is set to ‘ON’ (p.38) the call is answered when the

handset is lifted from the base.

• The intercom duration is displayed.

4. (Handsets 1 and 2)

To end the intercom,

Z P

• Intercom calls can be conducted within the radio area of the current base unit,

but not with units in neighbouring radio areas.

Intercom cannot be accepted in the following areas:
– when the other party is in intercom mode.
– when the other party is on hold during external call.
– while the other party is in conference call.

◆

Transferring a Call from One Handset to Another

The intercom can be used during a call, enabling you to transfer a call
between handsets registered to the same base unit.

Transferring a Call using the Intercom

Eg. Handset 1 is transferring an external call to Handset 2.

1. (Handset 1)

During a call,

Z N

(Intercom icon turns on).

• The call is put on hold.

2. (Handset 1)

desired handset no. eg.

• You will hear an internal ring back tone until the other handset is

answered.

Base 1

2 New Calls

03.08 21:06

Ï  Ô Í

INT.1

ASetting H/set
ASetting Base

Î Ï

 Ô Í

INT. 1

34567890123456

Î Ï

 Ô Í

INT.1-INT.2

00-00-00

Î Ï

 Ô Í

INT.1

1234567890123456

Î Ï 

Ô Í

INT.1

34567890123456

Î Ï 

Ô Í

30678_KX-TCD705G_a_English 8/5/01 6:58 am Page 32

Summary of Contents for KX-TCD705E

























































Search results

Summary of Contents for KX-TCD705E

Reviews:

Brands by name

Popular brands

Panasonic KX-TCD705E, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD705E

Reviews:

Brands by name

Popular brands