Panasonic KX-TCD545E Operating Instructions Manual Download Page 38

Page: 38 / 129

Using the Phonebook

Storing Caller Information in Base Unit
Phonebook

This feature can be operated with the cordless handset only.
To use an Audible Caller ID feature (p.36), you must store caller information into the
base unit phonebook.
To exit the operation, press

at any time.

•

If “

Memory Full

” is displayed in step

, the phonebook is full. To store, delete other

stored items in the phonebook.

•

If “

Memory Full

” is displayed in step

, the remaining recording time is

. To store,

delete unnecessary incoming/memo messages (p.105, 107).

•

To continue storing other caller information, repeat from step

•

If you do not use Audible Caller ID feature, select “

Skip Recording

” at step

and

go to step

•

If you need to go back to entering name during entering phone number, move the

JOYSTICK

up.

Press

LEFT SOFT

KEY

Press

JOYSTICK

Select “

Base

Phonebook

”, then

the display shows the
number of empty
phonebook entries.

Enter Name (p.39).
(max. 16 characters)

Press

JOYSTICK

Enter Phone
Number.
(max. 24 digits)

Press

JOYSTICK

Select “

Start

Recording

”.

Record the name
within 1 minute.

Press

JOYSTICK

Select “

Save

”, then

“

Saved

” is displayed.

545E_E_03.fm Page 38 Monday, September 1, 2003 1:51 PM

Summary of Contents for KX-TCD545E


































































































































Search results

Summary of Contents for KX-TCD545E

Reviews:

Related manuals for KX-TCD545E

Brands by name

Popular brands

Panasonic KX-TCD545E, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD545E

Reviews:

Related manuals for KX-TCD545E

Brands by name

Popular brands