Panasonic KX-TCD545E Operating Instructions Manual Download Page 121

Page: 121 / 129

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333

121

Use

ful Informati

Before Requesting Help

Problem

Possible cause

Solution

Page

Cannot dial out.

•

Call Bar mode set.

•

Particular dialled number

is restricted.

•

Key lock mode ON.

•

Turn feature off.

•

Remove number from

call restricted list.

•

Turn key lock OFF.

p.72

p.87

p.79

p.25

Cordless handset will not

ring.

•

Ringer switched off.

•

Set ringer to one of 6

volume levels.

p.69

Last number redial does

not work.

•

Number exceeded 24

digits.

•

Redial manually.

p.26

Audible Caller sounds late.

•

Recording time is long.

•

Shorten recording time

p.45

No Caller ID number

displayed.

•

Service not supplied.

•

Caller has withheld info.

•

Caller ID service must be

arranged with Network

provider.

p.30

icon flashes

•

Battery low.

•

Recharge batteries.

p.16

Cannot register cordless

handset to base unit.

•

Max. number of base

units already registered

to cordless handset.

•

Max. number of cordless

handsets already

registered to base unit.

•

Wrong PIN number

entered (Default 0000).

•

Electrical noise in local

area.

•

Delete unused base unit

registrations from

cordless handset.

•

Delete unused cordless

handset registrations

from base unit.

•

If PIN number is lost,

contact the Panasonic

Customer Care Helpline.

•

Move base unit/cordless

handset away from

sources of electrical

noise (e.g., TVs, radios,

etc.).

p.90

p.80

p.6

The unit begins ringing

(one ring) after other

connected telephones.

•

The SMS feature is

turned on.

•

Turn the SMS feature off,

if you do not use an SMS

service.

p.63

The display is blank even

if the unit is charged.

•

Battery low.

•

Recharge batteries more

than about 15 minutes.

p.16

Date and time

disappeared.

•

Power failure.

•

Set the date and time.

p.20

Clock is slow (fast).

•

Power failure.

•

Readjust date/time from

cordless handset 1.

p.20

545E_E_06.fm Page 121 Monday, September 1, 2003 1:56 PM

Summary of Contents for KX-TCD545E


































































































































Search results

Summary of Contents for KX-TCD545E

Reviews:

Related manuals for KX-TCD545E

Brands by name

Popular brands

Panasonic KX-TCD545E, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD545E

Reviews:

Related manuals for KX-TCD545E

Brands by name

Popular brands