manualshive.com logo in svg

Panasonic KX-TCD540NZ, Operating Instructions Manual, Page: 88 / 116

Share
Download
Panasonic KX-TCD540NZ Operating Instructions Manual Download Page 88

88

Answering System

Voice Date/Time Stamp-The date and time that the incoming/memo message was 
recorded will be announced after playback of the message. To set the Voice Date/Time 
stamp, set the date and time (p. 20).
Flash Memory Message Backup-The total recording capacity is approximately 
30 minutes or 64 messages. The greeting recording time is limited to 2 minutes and 
30 seconds. We recommend you to record a brief greeting message in order to leave 
more time for recording new incoming/memo messages. All messages (greeting, 
incoming and memo) are stored indefinitely on a “Flash memory” IC chip, even if a power 
failure occurs, all of the messages are saved until you erase them.

Answering System ON/OFF 

When you set the answering system ON, a caller can leave his/her messages.

Setting ON

Setting OFF

Setting ON

Setting OFF

1

Press JOYSTICK 
(or move).

2

Select “

 TAM 

Operation

”.

3

Select “

Answer On

”, 

then 

 is displayed.

1

Press JOYSTICK 
(or move).

2

Select “

 TAM 

Operation

”.

3

Select “

Answer Off

”, 

then 

 disappears.

Press ANSWER ON.

Indicator lights on.

Press ANSWER ON again.

Indicator lights off.

Summary of Contents for KX-TCD540NZ





















































































































Reviews:

No comments