manualshive.com logo in svg

Panasonic KX-TCD540NZ, Operating Instructions Manual, Page: 32 / 116

Share
Download
Panasonic KX-TCD540NZ Operating Instructions Manual Download Page 32

32

List Menu

Caller ID List Menu 

You can save the numbers from the Caller ID list into the handset phonebook, and you 
can edit (for calling) or delete item(s) in the Caller ID List.
To exit the operation, press 

 at any time.

•

When scrolling reaches the end of the list, an end tone will sound.

•

If there are no items stored in the caller list when “

Caller ID

” is selected, the 

handset display shows “

Memory Empty

”.

Storing a Number in the 

Handset

 Phonebook

1

Press JOYSTICK 
(or move).

2

Select “

 Caller 

ID

”.

3

Select the desired 
item.

Go to step 4.

Follow steps 1 to 3 shown above, then:

4

Select “

Save 

Phonebook

”.

5

Enter Name (p. 39), 

then press 

. 

(max. 16 characters)
If required, edit phone 
number. (max. 
24 digits)

6

Press JOYSTICK.

 

7

Select the desired 
category or “

Off

” 

(p. 36).

8

Select “

Save

”, then 

“

Saved

” is displayed.

Summary of Contents for KX-TCD540NZ





















































































































Reviews:

No comments