Panasonic KX-TCD340FX Operating Instructions Manual Download Page 12

Page: 12 / 72

Preparation

Connections

When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.

Important:

Use only the AC adaptor and telephone
line cord supplied with this unit.

Note:

After connection, you must charge the
batteries to make or answer calls with the
handset (page 12).

Never install telephone wiring during a
lightning storm.

The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)

The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight

of the adaptor may cause it to become
disconnected.

Battery installation

Insert the batteries negative (

)

terminal first.

Close the handset cover.

Note:

Use only rechargeable batteries (page 6).

Battery charge

Place the handset on the base unit for
about 7 hours before initial use.

When charging,

and battery strength

icon are alternately shown on the display.

(220

–

240 V, 50 Hz)

To telephone
network

Hook

TCD340FX(e).book Page 12 Wednesday, June 8, 2005 3:57 PM

Summary of Contents for KX-TCD340FX









































































Search results

Summary of Contents for KX-TCD340FX

Reviews:

Related manuals for KX-TCD340FX

Brands by name

Popular brands

Panasonic KX-TCD340FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD340FX

Reviews:

Related manuals for KX-TCD340FX

Brands by name

Popular brands