Preparation
15
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Battery replacement
If
3
flashes even after the handset
batteries have been charged for 7 hours, the
batteries must be replaced.
Important:
L
We recommend the use of Panasonic
rechargeable batteries noted on page 6. If
you install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
L
Do not mix old and new batteries.
1
Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
2
Remove the old batteries positive (
S
)
terminal first and install the new ones.
See page 13 for battery installation.
Turning the power on/off
Power on
Press
{ih}
for about 1 second.
L
The display will change to the standby
mode.
Power off
Press
{ih}
for about 2 seconds.
L
The display will go blank.
Setting the date and time
Important:
L
Confirm that the AC adaptor is connected.
L
Ensure that
w
is not flashing. If the
handset is in screen saver mode,
w
is not
displayed. Press
{ih}
to turn the
display on.
1
Press
$
(middle soft key).
2
Select
Y
, then press
,
.
3
Select
“
Time Settings
”
, then press
,
.
4
Select
“
Set Date & Time
”
, then press
,
.
5
Enter the current day, month and year by
selecting 2 digits for each.
Example:
17 May, 2005
Press
{
1
}{
7
}
{
0
}{
5
}
{
0
}{
5
}
.
6
Enter the current hour and minute by
selecting 2 digits for each.
L
You can select
“
AM
”
,
“
PM
”
or 24-hour
time entry by pressing
{*}
repeatedly.
Example:
3:30 PM
Press
{
0
}{
3
}
{
3
}{
0
}
, then press
{*}
repeatedly until
“
03:30 PM
”
is
displayed.
7
Press
,
.
8
Press
{ih}
.
Note:
L
To correct a digit, press
{<}
or
{>}
to
move the cursor, then make the
correction.
L
The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
TCD340E(e).book Page 15 Thursday, June 9, 2005 9:50 AM
