SMS (Short Message Service)
41
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
7
Select
“Yes”
, then press
{>}
.
8
Press
{ih}
.
Receiving a message
When an SMS message is received:
– a tone is heard (if the ringer is turned off,
this tone is not heard)
–
“Receiving SMS Message”
is
displayed
–
F
is displayed
Reading a received message
1
Press
{j
/OK
}
.
2
Select
“SMS”
, then press
{>}
.
3
To access the public mailbox
Select
“Public”
, then press
{>}
.
To access a private mailbox
Select the desired mailbox, press
{>}
,
then enter its password.
L
If a mailbox contains new (unread)
SMS messages, “
@
” is displayed next
to the total number of messages for
that mailbox.
4
Select
“Receive List”
, then press
{>}
.
5
Press
{e}
or
{v}
repeatedly to select a
message.
L
Messages which have already been
read are indicated by a “
Q
”, even if
they were read using another handset.
6
Press
{j
/OK
}
to read the message
content.
Note:
L
To call the message sender, press
{C}
or
{s}
.
L
If
“SMS Full”
is displayed, new SMS
messages cannot be received. Erase
unnecessary messages (page 40, 41).
L
If you receive a message from a party
saved in the handset phonebook, the
stored name is displayed.
L
Some SMS service providers attach a 1-
digit number to the message sender’s
phone number, and sender names stored
in the handset phonebook may not be
displayed as a result.
Replying to a message
1
While reading a received message,
press
{j
/OK
}
.
2
Select
“Reply”
, then press
{>}
.
3
Enter a message (page 44), then press
{j
/OK
}
.
4
Edit the destination phone number
and/or press
{j
/OK
}
, then continue
from step 7, “Writing and sending a new
message”, page 39.
Editing/forwarding a message
1
While reading a received message,
press
{j
/OK
}
.
2
Select
“Edit Message”
, then press
{>}
, then continue from step 5, “Writing
and sending a new message”, page 39.
Erasing received messages
1
While reading a received message,
press
{j
/OK
}
.
2
Select
“Erase”
, then press
{>}
.
L
To erase all messages in the selected
mailbox, select
“Erase All”
, then
press
{>}
.
3
Select
“Yes”
, then press
{>}
.
4
Press
{ih}
.
