50
“
Before Requesting Help
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display
the caller’s name and/or
phone number.
The display goes to the
standby mode while viewing
the Caller List.
When a second call is
received during a
conversation, the unit does
not display the new caller’s
name and/or phone number.
Remedy
≥
Programming is not possible while the
unit is in the talk mode or when viewing
the Caller List/directory list.
≥
Do not pause for over 60 seconds while
programming.
≥
Move closer to the base unit.
≥
(›)
,
(‹)
,
BACK
(fi)
or
FWD/EDIT
(fl)
may have been pressed when you
picked up the handset. Press
(FUNCTION/EXIT/CH)
and try again.
≥
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
≥
You cannot store an item in the directory
while the unit is in the talk mode.
≥
Do not pause for over 60 seconds while
storing.
≥
To answer the call, press
(TALK)
. Start
again from the beginning after hanging
up.
≥
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
≥
Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
≥
Telephone line noise may be affecting
the Caller ID information.
≥
Do not pause for over 60 seconds while
searching.
≥
The line mode selection is incorrect. See
page 15.
PQQX12623YA-BM5-改訂 03.5.16 7:28 PM ページ 50
