Panasonic KX-TA82492 - Voice Message Expansion Card Installation Manual Download Page 87

Page: 87 / 88

TEMPLATE FOR WALL MOUNTING

Copy or print this template and place it on the wall.

Install the screws as marked.

If you mount the main unit on a concrete or mortar wall, fit anchor plugs

(not included) into the wall beforehand.

Hook the unit onto the screw heads.

236 mm (9-5/16 in)

118 mm (4-5/8 in)

185 mm (7-5/16 in)

169 mm (6-5/8 in)

92.5 mm (3-5/8 in)

Install a screw here.

Make sure to set the print size to correspond with the size of this page.

If the dimensions of the paper output still deviate slightly from the measurements

indicated here, use the measurements indicated here.

Note

Summary of Contents for KX-TA82492 - Voice Message Expansion Card

























































































Search results

Summary of Contents for KX-TA82492 - Voice Message Expansion Card

Reviews:

Related manuals for KX-TA82492 - Voice Message Expansion Card

Brands by name

Popular brands

Panasonic KX-TA82492 - Voice Message Expansion Card, Installation Manual

Search results

Summary of Contents for KX-TA82492 - Voice Message Expansion Card

Reviews:

Related manuals for KX-TA82492 - Voice Message Expansion Card

Brands by name

Popular brands