Panasonic KX-TA82492 - Voice Message Expansion Card Installation Manual Download Page 32

Page: 32 / 88

2.2 Installing the Advanced Hybrid System

Installation Manual

Mounting on a Concrete or Mortar Wall

The included screws may be used when mounting the main unit on a concrete or mortar wall. User-
supplied anchor plugs are also necessary.

Place the template (found on the last page of this manual) on the wall to mark the 3 screw
positions.

Note

When you print out the template, the distance on the paper output may deviate slightly from the
indicated measurement. In this case, use the indicated measurement.

Drill holes in the wall as marked and fit the anchor plugs (not included) into the holes.

Fit the washers on the screws, and drive the screws into the anchor plugs.

Affix the PBX to the screw heads.

Template

Hammer

29 mm

(1-1/8 in)

Anchor Plug

6.4 mm

(1/4 in)

Drive the screw
to this point.

Summary of Contents for KX-TA82492 - Voice Message Expansion Card

























































































Search results

Summary of Contents for KX-TA82492 - Voice Message Expansion Card

Reviews:

Related manuals for KX-TA82492 - Voice Message Expansion Card

Brands by name

Popular brands

Panasonic KX-TA82492 - Voice Message Expansion Card, Installation Manual

Search results

Summary of Contents for KX-TA82492 - Voice Message Expansion Card

Reviews:

Related manuals for KX-TA82492 - Voice Message Expansion Card

Brands by name

Popular brands