Panasonic KX-TA824 Operating Manual Download Page 92

Page: 92 / 188

1.3 Telephone Features

Operating Manual

To switch from hands-free mode to the handset

1.3.49 Headset Operation

To talk using the headset

•

Helpful hints for hands-free operation:

•

If it is difficult to hear the other party's voice:

Increase the volume using the Navigator Key or Volume Key.

•

If the other party has difficulty hearing you:

Decrease the volume.

•

If the other party reports that your voice echoes:

Use the telephone in a room that has curtains, carpeting or both.

•

If parts of the conversation cannot be heard:

If you and the other party speak at the same time, parts of your conversation may be
lost. To avoid this, try to speak alternately.

Feature Manual References

•

1.1.63 Hands-free Operation

Connecting an optional headset allows for hands-free conversations.

This feature is also known as Handset/Headset Selection.

Feature Manual References

•

1.1.64 Headset Operation

Off-hook.

During a conversation in hands-free mode

No SLT

Press

SP-PHONE

Summary of Contents for KX-TA824





























































































































































































Search results

Summary of Contents for KX-TA824

Reviews:

Brands by name

Popular brands

Panasonic KX-TA824, Operating Manual

Search results

Summary of Contents for KX-TA824

Reviews:

Brands by name

Popular brands