Panasonic KX-TA1232 User Manual Download Page 224

Page: 224 / 280

Station Features and Operation (PT/SLT)

224

User Manual

Canceling

Listening to a stored message

You can listen to the messages stored in your mailbox easily. There are two operations to play
back messages.

Using the Message Waiting (MESSAGE) button

Manual dialing

PT and SLT

For PT: Press FWD/DND.
For SLT, PT: Dial 710.

Lift the handset or press
SP-PHONE/MONITOR.

Hang up or press
SP-PHONE/MONITOR.

Confirmation tone
and dial tone

For SLT, PT

For PT

Dial 0.

You may press the flexible button
assigned as the FWD/DND button
instead.

<PT Display Example>

FWD/DND Cancel

FWD/DND

Press MESSAGE.

Lift the handset or press
SP-PHONE/MONITOR.

If there is a message in the mailbox, the MESSAGE indicator
light is on.

You can listen to the stored message.

MESSAGE

Any Telephone

Enter the Voice Mail extension number.

Voice Mail extension no.

Lift the handset or press
SP-PHONE/MONITOR.

You can listen to the stored message by
following the Voice Mail guidance.

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for KX-TA1232

























































































































































































































































































Search results

Summary of Contents for KX-TA1232

Reviews:

Brands by name

Popular brands

Panasonic KX-TA1232, User Manual

Search results

Summary of Contents for KX-TA1232

Reviews:

Brands by name

Popular brands