Panasonic KX-TA1232 User Manual Download

Page: 161 / 280

Station Features and Operation (PT/SLT)

User Manual

161

Flowchart of the Live Call Screening (LCS) Feature

Setting the password

Note

In order to change the password, cancel the current password and then set a new password.

Press LCS button.
Enter the password.

Press LCS button.

Press SP-PHONE/
MONITOR, or
LCS button.

(No operation)

Hang up*

* : To hold the current call, press the HOLD button.

To return to the held call, press the CO button whose indicator light flashes green slowly.

To set LCS on

To cancel LCS

Handsfree Mode

During a conversation

Private Mode

To monitor

To stop the alert tone

To monitor

To stop monitoring

To answer the call

(Call Waiting Tone)

(Alert Tone)

Lift the handset.

Press the LCS or
the SP-PHONE
button.

Lift the handset.

To stop monitoring

Hang up.

Press FLASH or the
LCS Cancel button.

Press the LCS cancel
button.

The shaded areas are for the Handsfree operation.

Lift the handset or press
SP-PHONE/MONITOR.

Hang up or press
SP-PHONE/MONITOR.

Enter the 3-digit password
(000 through 999) twice.

password

password

Confirmation tone
and dial tone

Dial 799.

<PT Display Example>

Password :XXX

password

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for KX-TA1232

























































































































































































































































































Search results

Summary of Contents for KX-TA1232

Reviews:

Related manuals for KX-TA1232

Brands by name

Popular brands

Panasonic KX-TA1232, User Manual

Search results

Summary of Contents for KX-TA1232

Reviews:

Related manuals for KX-TA1232

Brands by name

Popular brands