Panasonic KX-PRW120 Operating Instructions Manual Download

Page: 46 / 64

*1 If there are no new messages in the voice

mail,

is not displayed.

Note:

If the handset still indicate there are new
messages even after you have listened to

all new messages, turn it off by pressing
and holding

until the handset beeps.

Error messages

Display message

Cause/solution

Ask phone
company for
VM access #

You have not stored the voice mail access number. Store the
number (page 45).

Base no power

No link to base.
Reconnect main
base AC adaptor.

The handset has lost communication with the base unit. Move
closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been canceled.
Re-register the handset (page 32).

Busy

The called unit is in use.

Other units are in use and the system is busy. Try again later.

The handset you are using is too far from the base unit. Move
closer and try again.

Check tel line

The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 9).

Error!!

Recording was too short. Try again.

Invalid

There is no handset registered to the base unit matching the
handset number you entered.

The handset is not registered to the base unit. Register the
handset (page 32).

Memory full

The phonebook memory is full. Erase unwanted entries
(page 19).

Message memory is full. Erase unwanted messages
(page 37).

The call block list memory is full. Erase unwanted entries
(page 29).

The schedule alarm memory is full. Erase unwanted entries
(page 32).

Handset memory is full. Erase unwanted wallpaper images,
photos, or ringtones (page 25).

Requires
subscription
to Caller ID.

You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.

Use
rechargeable
battery.

A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 3, 6.

For assistance, please visit http://www.panasonic.com/help

Useful Information

PRW120(en)_1016_ver041.pdf 46

2013/10/16 10:40:19

Summary of Contents for KX-PRW120

































































Search results

Summary of Contents for KX-PRW120

Reviews:

Related manuals for KX-PRW120

Brands by name

Popular brands

Panasonic KX-PRW120, Operating Instructions Manual

Search results

Summary of Contents for KX-PRW120

Reviews:

Related manuals for KX-PRW120

Brands by name

Popular brands