6
Connecting/disconnecting the mobile phone
Auto connection to the Bluetooth devices (mobile phones)
The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change
the interval (default:
“
1 min
”
), see the operating instructions.
L
When you are using a mobile line, the base unit loses its connection from other Bluetooth
devices (mobile phone). To automatically resume the connection to mobile phones, leave the
auto connection on.
Connecting/disconnecting the mobile phone manually
If you will not be using the paired mobile phone’s link to mobile feature temporarily (for example,
you do not want the unit to ring when your mobile line receives a call), you can disconnect your
mobile phone from the base unit. If you want to use it again, reconnect the mobile phone to the
base unit.
L
After you disconnect a paired mobile phone from the base unit manually, it will automatically be
connected to the base unit in 30 minutes. If you do not use the link to mobile feature anymore,
unpair the mobile phone.
L
A disconnected mobile phone is not unpaired from the base unit, so pairing it to the base unit
again is unnecessary.
Base unit:
To connect
Press
{
}
and wait for a few seconds for the mobile phone and base unit to connect to each
other.
Handset:
1
To connect/disconnect:
For mobile 1:
{
6
}
(right soft key)
(
6251
(A long beep sounds.)
For mobile 2:
{
6
}
(right soft key)
(
6252
(A long beep sounds.)
2
{
m
}
Mobile line only mode (If you do not use the landline) (Handset)
If you do not use the landline, set the mobile line only mode to use this unit more conveniently.
The default setting is
“
On
”
.
L
If you turn on the
“
Mobile Line Only Mode
”
, disconnect the telephone line cord from the
base unit. Otherwise the
“
Mobile Line Only Mode
”
cannot be activated.
1
{
6
}
(right soft key)
(
157
2
To turn on:
{
r
}
:
“
On
”
s
{
OK
}
s
{
r
}
:
“
Yes
”
s
{
OK
}
To turn off:
{
r
}
:
“
Off
”
s
{
OK
}
Link to mobile
PRL250EX1_PRD250EX1(4lang)_QG.book Page 6 Monday, October 20, 2014 7:47 PM
