1. LCD (Liquid Crystal Display):
KX-NT630 monochrome,
KX-NT680 color.
2. Flexible Buttons:
used to seize an outside line or perform a
feature that has been assigned to the button.
3. Soft Buttons (KX-NT630:S1-S4,KX-NT680: S1-S5):
Soft
buttons (located from left to right) are used to select the item
displayed on the bottom line of the display.
4. Message/Ringer Lamp:
when you receive an intercom call
the lamp flashes green; on outside call the lamp flashes red.
When someone has left you a message the lamp remains red.
5. Next Page
: Used to switch the page for the flexible buttons
(KX-NT630 only).
6. Cancel
: Used to cancel the selected item.
7. Handset Hook
: Keeps the handset stable when the unit is
mounted on a wall.
8. Navigator Key
: Used to adjust the volume, etc.
9. ENTER
: Used to assign the selected item.
10
.
MESSAGE:
Used to leave a message waiting Indication or
call back the party who left the Message
waiting indicator.
11
.
PAUSE/PROGRAM
: used to insert a pause when
Storing a phone number, also used for programming
this unit.
12
.
FLASH/RECALL
: Used to disconnect the current call and
make another call without hanging up.
13. REDIAL:
Used to redial the last dialed number.
14. AUTO ANS/MUTE:
Used to receive an incoming
call in hands-free mode or mute the microphone/Handset during
a conversation.
15
.
AUTO DIAL/STORE
: Used for System/Personal
Speed Dialing or storing program changes.
16
.
CONF
: Used to establish a multiple party connection.
17
.
TRANSFER
: Used to transfer a call to another party.
18
.
FWD/DND
: Used to switch Call Forwarding or Do Not
Disturb on your extension.
19. HOLD:
Used to place a call on hold.
20
.
INTERCOM:
Used to make or receive intercom calls.
21
.
SP-PHONE (Speakerphone)
: Used for performing
hands-free operation.
22. Microphone
: Used for hands-free conversation.
