PBX Feature List
You can use the following PBX features. For details, refer to the corresponding sections in this guide or to the
User Manual for the connected PBX.
Note
•
The PBX features marked with a
icon are only available for the manager extension.
•
The buttons with [ ] do not exist by default. To create the buttons, see "Customising the Flexible Buttons
(Page 142)".
Feature
Operation
Absent Message
You can show the reason you do not answer, if
the caller uses a Panasonic display proprietary
telephone.
There are eight preprogrammed messages and
one for your personal message (16 characters).
•
Presence Status Setting (Page 82)
To set
+
–
(parameter) +
To cancel
Account Code Entry
You may give a specified account code to
extension users and check their telephone usage.
You can specify an account code for each client
and check the call duration.
+ account code +
+ outside phone no.
Alternate Calling—Ring/Voice
The caller can alternate the alerting method,
either ring or voice, when making an intercom call.
On the other hand, any extension can set the
alerting method, either ring or voice, when
receiving an intercom call.
Automatic Callback Busy
You can set the telephone to receive callback
ringing:
•
when a dialled extension becomes idle.
(After you answer the callback ringing, the
previously dialled extension number is
automatically redialled.)
•
when your desired outside line that is in use
by another extension becomes idle.
(After you answer the callback ringing, you
can make a call using the seized outside line.)
•
Reserving a Busy Line (Automatic Callback
Busy) (Page 91)
To set
To cancel
Operating Instructions
93
PBX Feature List
