Document Version 2007-06
For Best Performance
Operating Distance
Please keep KX-NT300 series IP-PTs with connected
Bluetooth Modules, 3 m (9 ft 10 in) or more apart from
each other.
Also, if a Bluetooth headset is in use near a KX-NT300
series IP-PT with a connected Bluetooth Module, other
than the one it is registered to, noise may be heard. Move
away from the IP-PT and closer to the one it is registered
to, to improve the signal.
Noise
Signals are transmitted between this module and the
Bluetooth headset using radio waves. For maximum
distance and noise free operation, it is recommended
that the module is situated away from electrical
appliances such as faxes, radios, personal computers, or
microwaves.
•
Systems using the 2.4 GHz ISM (Industrial, Scientific and
Medical) band may interfere with this product. Examples of
such systems are cordless telephones, wireless LAN, Home
RF, microwave ovens and other ISM devices. These
systems may cause minor noise.
Trouble shooting
Important Information
When using this module, keep the following
conditions in mind.
•
Do not disassemble this module. Dangerous electrical
shock could result. The module must only be disassembled
and repaired by qualified service technicians.
•
This module is designed to be installed under controlled
conditions of temperatures no less than 5 °C (41 °F) or
greater than 40 °C (104 °F).
Medical:
Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids, to determine if they are
adequately shielded from external RF (radio frequency) energy
(the product operates in the frequency range of 2.4000 GHz to
2.4835 GHz and the power output is 2.5mW (max.)). Do not use
the product in health care facilities if any regulations posted in
the area instruct you not to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
FCC and other information
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION:
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate this device.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
FCC RF Exposure Warning:
The product complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
The product must not be collocated or operated in conjunction
with any other antenna or transmitter.
Problem:
I cannot have a conversation using the
Bluetooth headset.
Solution:
•
Make sure that the Bluetooth headset is properly
registered to the module.
•
Make sure that the Bluetooth headset is properly
charged according to the manual of the Bluetooth
headset.
•
Remove the wired headset from the headset jack.
Priority is given to the wired headset when both are
connected.
Problem:
I cannot register, de-register, or confirm the
ID of the Bluetooth headset.
Solution:
•
Make sure that the module is properly installed in the IP-PT.
NT307M-b5.fm Page 2 Tuesday, May 22, 2007 11:43 AM
See more
Panasonic Manuals
For more information call 877-289-2829
or visit www.voicesonic.com
