10.4. IC6 (PoE Interface Controller)
Pin
No.
Terminal Name
I/O Setting
Contents of Control
Remark
1
NC
-
No Internal Connection.
2
Rclass
I
Class Select Input.
3
NC
-
No Internal Connection.
4
Vin
I
Power Input. Tie to system -48V through the input
diode bridge.
5
Vout
O
Power Output. Supplies -48V to the PD load through
an internal power MOSFET that limits input current.
VOUT is high impedance until the input voltage rises
above the turn-on UVLO threshold.
The output is then current limited. See Applications
Information.
6
nPWRGD
O
Power Good Output , Open-Drain
Signals to the PD load that the LTC4257-1 MOSFET
is on and that the PD’s DC/DC converter can start
operation. Low impedance indicates power is good.
PWRGD is high impedance during detection,
classification and in the event of a thermal overload.
PWRGD is referenced to VIN.
7
NC
-
No Internal Connection.
8
GND
-
Digital GND
34
KX-NT265X / KX-NT265X-B
Summary of Contents for KX-NT265X
