Panasonic KX-NS300, Getting Started

Page: 54 / 60

For Non-KX-UT Series SIP Phones
After connecting non-KX-UT series SIP phones to the PBX over a network, register those IP terminals to the
PBX manually.
Follow the procedure below for registration.
1. a.
Click Setup
®
PBX Configuration
®
Configuration
®
Slot .
b.
Place the mouse cursor over the Virtual Slot , and
in the menu that appears, click Select Shelf .
c.
Move the mouse pointer over the V-SIPEXT8 card
(Virtual 8-Channel SIP Extension Card). A menu will
be shown under the mouse pointer.
d.
Click Port Property .
2. Assign extension numbers to the SIP extensions.
•
If the Automatic Extension Number Set for Extension
Card feature is enabled, the extension numbers of
SIP extension are automatically assigned. To
programme this feature, refer to "9.35 PBX
Configuration—[1-3] Configuration—Option—
New Card Installation—Automatic Extension
Number Set for Extension Card" in the PC
Programming Manual.
•
If not, enter the extension number for each SIP
extension manually.
3. Set passwords for the SIP extensions.
a.
Click the cell in the Connection column for each SIP
extension you wish to register. The Command
Connection screen appears.
b.
Click OUS .
c.
Enter a password in the Password box for each SIP
extension.
d.
Click Apply .
e.
Click the cell in the Connection column for each SIP
extension to which a password has been assigned.
The Command Connection screen appears.
f.
Click INS .
g.
Click OK .
54 Getting Started
4.3.2 Registering IP Telephones