background image

6.

In the 

LAN

 settings:

The IP addresses for the PBX, DNS server, and DSP
cards can be assigned automatically through a DHCP
server or entered manually.

When using a DHCP server:

a.

Select 

Obtain an IP address automatically

.

b.

Select 

Obtain DNS server address automatically

.

c.

Select 

Obtain DSP IP address automatically

.

Notice

The boxes will turn grey and the IP address
information will be assigned automatically.
Write down the address information assigned to
the PBX for future reference.

d.

Click 

Next

.

When not using a DHCP server:

a.

Select 

Use the following IP address

.

b.

Enter an IP address

*1

, subnet mask

*2

, and default

gateway

*1

. (You may not need to specify the default

gateway, depending on your network configuration.)

c.

Select 

Use the following DNS server address

.

d.

Enter the preferred and alternative DNS IP
addresses

*1

.

e.

Select 

Use the following DSP IP address

.

f.

Enter IP address

*1

 for installed DSP card.

g.

Click 

Next

.

*1

Valid IP address range: "1.0.0.1" to "223.255.255.254"

*2

Valid subnet mask address range: "0–255.0–255.0–255.0–255" 
(except "0.0.0.0" and "255.255.255.255")

30

Getting Started

4.1.1 Easy Setup Wizard

Summary of Contents for KX-NS300





























































Reviews: