3.
To enter server information, first check the box for
Enable Server
.
Set your language, dialling codes for your country/area, port numbers to be used by CA Server and by CA
Web Manager, and enter and verify the Administrator password.
Then, enter your PBX’s information. Specify the IP address and port number of the PBX on your network,
and enter the PBX’s Installer Level password (the same password used to log in to the Maintenance
Console), and the Maintenance Console’s Port Number. Click
OK
to save the settings.
Note
•
The IP address and port numbers for the PBX can be confirmed in one of the following locations:
•
KX-NCP/KX-TDE series: "Card Property" screen of the PBX’s MPR card in the PC Maintenance
Console
•
KX-NS1000:
–
IP Address: "Home Screen"
®
"List View" screen in the PBX’s Web Maintenance Console
–
Port Numbers: "PBX Configuration"
®
"Configuration"
®
"Slot"
®
"Site Property"
®
"Main"
®
"Port Number" screen in the PBX’s Web Maintenance Console
For more information about connecting to the PBX, refer to your PBX’s documentation.
•
The information entered on this screen will not be backed up, and it will not be restored when using
the Backup Database or Restore Database functions. Be sure to record this information for later
reference.
•
When setting up CA Server for use with a One-look network of KX-NS1000 PBXs, specify the IP
address and port number of the Master unit.
Quick Reference Guide
17
4.1 Installing CA Server
