manualshive.com logo in svg

Panasonic KX-NCP500, Pc Programming Manual, Page: 763 / 892

Share
Download
Panasonic KX-NCP500 Pc Programming Manual Download Page 763

TRG 01–TRG 64

Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled for use
with that carrier.

Default

Trunk groups 01–04: ON
All other trunk groups: OFF

Value Range

OFF (white), ON (blue)

Maintenance Console Location

10.6  [8-5] Carrier

Programming Manual References

None

Feature Manual References

1.1.3  ARS (Automatic Route Selection)

Authorization Code for Tenant

Specifies an Authorization code for each tenant. The Authorization codes can be added to the user-dialed
number by specifying "A" command in 

Modify Command

 on the 

Carrier

 tab.

Authorization Code for Tenant—Tenant 1–Tenant 8

Specifies the Authorization code of each carrier for each tenant.

Default

Not stored.

Value Range

Max. 16 digits (consisting of 0–9, *, and #)

Maintenance Console Location

10.6  [8-5] Carrier

Programming Manual References

None

Feature Manual References

1.1.3  ARS (Automatic Route Selection)
17.1.3  Tenant Service

Document Version  2009-12  

PC Programming Manual

763

10.6 [8-5] Carrier

Summary of Contents for KX-NCP500





























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments