Panasonic KX-NCP500, Pc Programming Manual

Page: 51 / 892

Item Description
Index The ordinal number assigned to an error record in the current log.
Date The date of the error detection.
Time The time of the error detection.
Error Code The 3-digit error code assigned by the PBX.
Sub Code The 6-digit sub code of the relevant hardware. (X1YYZZ)
•
X: Slot type
–
Physical slot: " " (blank)
–
Virtual slot: "*" (asterisk)
•
1: Cabinet number
•
YY: Slot number
–
KX-NCP500 (Physical slot): 00 to 05
(00: IPCMPR Card Slot; 01 to 05: Free Slots)
–
KX-NCP1000 (Physical slot): 00 to 07
(00: IPCMPR Card Slot; 01 to 07: Free Slots)
–
KX-NCP500/KX-NCP1000 (Virtual slot): 00 to 08
(00: Built-in ESVM card; 01 to 04: Virtual CO Line Slots; 05
to 08: Virtual Extension Slots)
•
ZZ: Port number
–
For optional service cards except OPB3 card:
Port number (01 to 16) will be displayed.
–
For OPB3 card:
Sub slot number (1 to 3) + port number (1 to 4) will be
displayed as follows:
•
Sub slot 1 of OPB3: 11 to 14
•
Sub slot 2 of OPB3: 21 to 24
•
Sub slot 3 of OPB3: 31 to 34
Note
When there is no parameter for slot and port number, YY and ZZ
will be displayed as "00".
Example: Sub code for IPCMPR card = " 10000"
Error Message A description of the error.
To view the error log
•
From the Utility menu, select Error Log .
2.6.9 Utility—T1 Signaling Bit Monitor
Displays reference signaling bit information for all channels of the T1 card, by monitoring sent and received A,
B, C and D bits. This utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
While monitoring is being performed, any displayed bits whose value changes from 0 to 1 or vice versa will be
highlighted in red until the next screen refresh is performed.
To view signaling bit information
1.
From the Utility menu, select T1 Signaling Bit Monitor .
Document Version 2009-12 PC Programming Manual 51
2.6.9 Utility—T1 Signaling Bit Monitor