manualshive.com logo in svg

Panasonic KX-NCP500, Pc Programming Manual, Page: 721 / 892

Share
Download
Panasonic KX-NCP500 Pc Programming Manual Download Page 721

SVM Card No. 1, 2—Card Name

Specifies the name of the card, for programming reference.

Default

Card No. 1:
Card No. 2: Voice Msg 2

Value Range

Max. 20 characters

Maintenance Console Location

7.5  [5-3-3] Voice Message—SVM

Programming Manual References

None

Feature Manual References

16.1.8  SVM (Simplified Voice Message)

Recording Mode

Specifies the sound quality of messages recorded by the SVM feature. Increasing the recording quality reduces
the total length of recording time available with this feature.

Default

Middle

Value Range

Low: About 120 minutes of messages can be recorded.
Middle: About 60 minutes of messages can be recorded.
High: About 40 minutes (IPCMPR)/20 minutes (ESVM) of messages can be recorded.

Maintenance Console Location

7.5  [5-3-3] Voice Message—SVM

Programming Manual References

6.9  [4-1-7] Wired Extension—Simplified Voice Message
6.16  [4-2-5] Portable Station—Simplified Voice Message

Feature Manual References

16.1.8  SVM (Simplified Voice Message)

Remote Access

Selects whether the Walking COS feature can be used while listening to a greeting message from the SVM
feature. Using Walking COS, a user can access his or her message box remotely.

Document Version  2009-12  

PC Programming Manual

721

7.5 [5-3-3] Voice Message—SVM

Summary of Contents for KX-NCP500





























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments