KX-NT300 series (except KX-NT321)
Select "Network".
ENTER
Select "Disable"
for DHCP setting.
ENTER
IP Address*
1
ENTER
To set the IP address of the IP-PT
Select "Default Gateway".
ENTER
Default Gateway Address*
3
ENTER
To set the default gateway address (if required)
To set the subnet mask address
Select "Subnet Mask".
ENTER
Subnet Mask Address*
2
ENTER
Select "IP Address".
To start programming
Press "SETUP" when it is displayed.
SETUP
Supply power to the IP-PT.
Press "STORE".
STORE
To end programming
The IP-PT will reboot
and can then be
registered to the PBX.
Return to the
Menu screen.
Return to the
Menu screen.
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
PBX IP Address
ENTER
ENTER
Select "PBX".
Select "PBX IP
Address".
ENTER
ENTER
Select "Secondary
PBX".
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Getting Started
41
4.3.1 Assigning the IP Addressing Information
Summary of Contents for KX-NCP500
