Panasonic KX-NCP500, Programming Manual

Page: 988 / 1016

Direct Inward Dialling (DID)/Direct Dialling In (DDI)
•
3.49 [1-1] Slot—Card Property - DID type (KX-TDE series only)
•
4.5 [2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digit Timer—DDI / DID
•
12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
–
Distribution Method
–
DDI/DID/TIE/MSN—Remove Digit
–
DDI/DID/TIE/MSN—Additional Dial
•
12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
•
4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
–
DISA—Delayed Answer Timer
–
DISA—Mute & OGM Start Timer after answering
–
DISA—No Dial Intercept Timer
–
DISA—2nd Dial Timer for AA
–
DISA—Intercept Timer—Day, Lunch, Break, Night
–
DISA—Disconnect Timer after Intercept
–
DISA—CO-to-CO Call Prolong Counter
–
DISA—CO-to-CO Call Prolong Time
–
DISA—Progress Tone Continuation Time before Recording Message
–
DISA—Reorder Tone Duration
•
4.5 [2-3] Timers & Counters—Miscellaneous— Extension PIN—Lock Counter
•
4.12 [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions— Accept the Call
from DISA
•
5.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
–
DISA Tone Detection—Silence
–
DISA Tone Detection—Continuous
–
DISA Tone Detection—Cyclic
•
6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination— Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
•
6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination— Intercept Destination—
When called party does not answer—Day, Lunch, Break, Night
•
7.3 [5-3-1] Voice Message—DISA System
•
7.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
Display Information
•
4.18 [2-9] System Options—Option 5— PT Feature Access—No. 1–8
•
6.1 [4-1-1] Wired Extension—Extension Settings—Option 5
–
Display Language
–
Incoming Call Display
–
Automatic LCD Switch when Start Talking
•
6.10 [4-2-1] Portable Station—Extension Settings—Option 5
–
Display Language
–
Incoming Call Display
988 PC Programming Manual
Feature Programming References