Panasonic KX-NCP500, Programming Manual

Page: 438 / 1016

3.57 [1-1] Slot—Port Property - IP-Extension Port
(KX-TDE series only)
Various settings can be programmed for each IP extension port.
To change the status of extension ports, click
Command .
IP-PT Registration and De-registration
An IP-PT must be registered to the PBX by programming both the PBX and IP-PT before it can be used.
Programming instructions for the PBX are given below.
It is possible to de-register the IP-PT later.
Preparation
Follow the steps below to prepare before registering an IP-PT.
1.
Open 3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only) , and confirm that the IP
address and subnet mask settings of the IP-EXT16 card are correct.
2.
Open 3.56 [1-1] Slot—Card Property - IP Extension—Common Settings (KX-TDE series only) and
set the gateway address.
Registration
Follow the steps below to register the IP-PT.
1.
Connect the IP-PT to be registered to the network and, if necessary, the power supply.
2.
Click Registration .
A dialogue box will appear. Non-registered (available) extension numbers and names are displayed on the
left.
3.
Highlight numbers and names and click the right arrow to select them for registration. Click Next .
4.
If the registration is still in progress, the dialogue box will show "Registration Executing".
If the registration is successful, the dialogue box will show "Registration Completed". Click
Close .
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
De-registration
Follow the steps below to de-register the IP-PT.
1.
Click De-registration .
A dialogue box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for de-registration. Click Next .
A dialogue box will appear.
3.
Click Confirm .
If the de-registration is successful, the dialogue box will show "De-registration Succeed".
4.
Click Close .
Once the IP-PT is successfully de-registered, the status of the IP-PT will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the IP-PT when normal de-registration has been unsuccessful
or IP address settings have been changed or deleted only on the IP-PT.
1.
Click Forced De-registration .
A dialogue box will appear. Registered extension numbers and names are displayed on the left.
438 PC Programming Manual
3.57 [1-1] Slot—Port Property - IP-Extension Port (KX-TDE series only)