Problem
Cause & Solution
Email related functions do not
work properly.
R
For environments where Secure Sockets Layer (SSL) encryption is required
to send and receive email, additional email server configuration and/or the
use of another email system may be required.
11.3.2 Printing problems
Problem
Cause & Solution
The printing quality is poor
(e.g. has smudges, blurred
points or lines).
ABC
R
Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
R
You may have used paper with a cotton and/or fibre content that is over
20 %, such as letterhead or resume paper.
R
The recording paper is too damp. Use new paper.
I changed the recording
paper, but the printing quality
is still poor.
R
The glass or rollers are dirty with correction fluid, etc. Clean them
(page 95, 98). Please do not insert a document before correction fluid
has dried completely.
R
The toner save mode of feature #482 is ON (page 60).
R
The remaining toner is low. Replace the toner cartridge.
R
To check the drum life and quality, please print the printer test list
(page 99). If printing quality is still poor, replace the toner cartridge and
drum cartridge.
A blank sheet is ejected.
R
You placed the document facing the wrong way when using the copier.
R
The other party placed the document in their fax machine the wrong way.
Check with the other party.
Coloured and grey objects
are printed in black instead of
greyscale when printing from
Microsoft PowerPoint or
other applications.
R
Select
[Color]
or remove the check next to
[Grayscale]
in the print dialogue
so that coloured or grey objects will be printed in greyscale properly.
When using the unit as a
printer, the printing result is
distorted.
R
When your unit is connected to the computer by USB, if you cancel printing
using your computer, then immediately re-start printing, the printing result
may be distorted. To avoid this, you must wait for 60 seconds before
re-printing.
11.3.3 Scanner
Problem
Cause & Solution
I cannot scan.
R
When scanning at a high resolution, a large amount of available memory is
required. If your computer warns that there is insufficient memory, close
other applications and try again.
R
The unit is in use. Try again later.
R
There is not enough space on the hard disk. Delete unnecessary files and
try again.
R
Check the connection between the computer and the unit (page 17, 25).
R
Restart the computer, and try again.
R
You attempted to scan a document longer than the paper size which you
set. Change the setting or divide the document into the appropriate paper
size, and try again.
81
11. Help
Summary of Contents for KX-MB2025HK
Page 117: ...117 Notes ...
Page 118: ...118 Notes ...
Page 119: ...119 Notes ...
Page 120: ... MB2030HK MB2030HK PNQX2618XA CM1009DY2101 CD ...
