Panasonic KX-MB1500C, Operating Instructions Manual

Page: 29 / 80

5.1 Making a copy
M Set NMCNMDNMEN
M Stop N M Start N
M Size N
M Quality N
M Fax Auto Answer N
M Copy N
* The pictured model is KX-MB1520.
1
If the M Copy N light is OFF, turn it ON by pressing
M Copy N repeatedly.
2
Set the original (page 18).
3
If necessary, change the copy size (original
document size and recording paper size), resolution
and contrast according to the type of document.
R To select the copy size, see page 29.
R To select the contrast, see page 29.
R To select the resolution, see page 29.
4
If necessary, enter the number of copies (up to 99).
5
M Start N
R The unit will start copying.
6
After you finish copying, press M Stop N to reset the
settings you set in step 3 and 4.
Note:
R To stop copying, see page 58.
R You can change the default operation mode (feature
#463 on page 49) and the timer before returning to
the default operation mode (feature #464 on
page 49) (KX-MB1520 only).
R If the M Fax Auto Answer N light is ON, the unit can
receive faxes automatically even when in the copy
mode (KX-MB1520 only).
To select the copy size
1.
Press M Copy Size N (KX-MB1500)/ M Size N
(KX-MB1520) repeatedly to select “
ORIGINAL
SIZE
” .
2. Press MCN or MDN repeatedly to select the size of your
original document. A M Set N
3. Press MCN or MDN repeatedly to select the size of
recording paper size.
R When “
#2
” is selected, you can change the
recording paper size by pressing MEN repeatedly.
R The appropriate zoom rate will be set
automatically. Some copying features cannot be
used during zoom copy. See page 30 for
details.
4. M Set N
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press M Quality N repeatedly to display “
CONTRAST
” .
2. Press MCN or MDN to change the contrast.
3. M Set N
Note:
R You can hold the previous contrast setting (feature
#462 on page 54).
To select the resolution
1.
Press M Quality N repeatedly to display
“
RESOLUTION
” .
2. Press MCN or MDN to change the resolution.
– “
TEXT/PHOTO
” : For both text and photographs.
– “
TEXT
” : For text only.
– “
PHOTO
” : For photographs, shaded drawings,
etc.
3. M Set N
Note:
R You can change the default resolution (feature #461
on page 54).
29
5. . Copier
5. Copier