Panasonic KX-MB1500C Operating Instructions Manual Download

Page: 54 / 80

9.4 Copy features

Feature/Code

Selection

Setting the input tray to use
for copy

MBNM

“

”

(default): The paper input tray is selected. The displayed paper size

depends on the recording paper size setting (feature #380 on page 48).

“

”

: The manual input tray is selected. The displayed paper size depends

on the recording paper size setting (feature #381 on page 48).

Changing the default copy
resolution

MBNM

To change the default resolution setting for copying.

“

TEXT/PHOTO

”

(default): For documents containing both text and

photographs.

“

TEXT

”

: For documents containing only text.

“

PHOTO

”

: For documents containing photographs, shaded drawings, etc.

Holding the previous contrast
setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

Note:

The previous setting will be held individually for copying.

Holding the previous page
layout setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

Holding the previous zoom
setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

Holding the previous collate
setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

Holding the previous edge
setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

Setting the frame margin

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: Your copies will be automatically reduced according to the

margin setting. However, if you change the zoom rate (page 30), your copies
will not be automatically reduced.

Holding the previous margin
setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

9. Programmable Features

Summary of Contents for KX-MB1500C

















































































Search results

Summary of Contents for KX-MB1500C

Reviews:

Related manuals for KX-MB1500C

Brands by name

Popular brands

Panasonic KX-MB1500C, Operating Instructions Manual

Search results

Summary of Contents for KX-MB1500C

Reviews:

Related manuals for KX-MB1500C

Brands by name

Popular brands